Access virus os2 Manuale Utente

41

Controls the delay time of the Chorus.

Controls the amount of feedback in the Chorus.

Determines the waveshape of the Chorus LFO. You can select from sine, triangle, sawtooth, pulse, S&H
(abb. for: Sample & Hold) and S&G  (abb. for: Sample & Glide) waves.

In SINGLE MODE, all Delay settings apply to the SINGLE PROGRAM in the conventional
manner and are stored along with the program.
However in MULTI MODE, all 16 PARTs access the same Delay effect. In this case, the only
dedicated parameter you have available for each part is EFFECT SEND; all other Delay
parameters apply to the same Delay unit and affect all PARTs.
Consequently, if you set the Virus to MULTI MODE or MULTI SINGLE MODE, all settings you
dial in for the Delay (including EFFECT SEND) affect the MULTI PROGRAM and are stored

along with it. If the Virus is in MULTI MODE or MULTI SINGLE MODE and you activate a new
SINGLE, the Delay parameters of the SINGLE are ignored and the Delay parameters of the
current MULTI PROGRAM are activate.
As a rule, in MULTI MODE all SINGLE settings pertaining to the Delay are ignored,  with the
exception of EFFECT SEND.

Controls the level at which the signal is patched through the Delay.
EFFECT SEND is equivalent to the "post-fade" effects loop of a mixing console.