Access virus os2 Manuale Utente

VIRUS Owner’s Manual

50

press. The sound program can still be played polyphonically and you can allocate several
different filter frequencies and independent envelopes simultaneously (!) to the input
signal via the MIDI keyboard.

Instead of the internal sound sources, an external signal source is routed to the filter
section. In contrast to DYNAMIC mode, in STATIC mode one or two voices (depending
on the INPUT SELECT setting, see appropriate section) of the Virus are activated
automatically without you actually playing notes on this PART. The filters and the
amplifier are switched permanently open, the envelopes are deactivated and incoming
notes are ignored. Consequently you can use the filters and the amplifier as an effects
section for the input signal.

Selects the external signal source for the INPUT MODEs DYNAMIC and STATIC. You can chose from:

The left channel of the external dual audio input.

Both channels of the external dual audio input (stereo).

The right channel of the external dual audio input.

The left channel of internal Aux 1.

Both channels of internal Aux 1 (stereo).

The right channel of internal Aux 1.

The left channel of internal Aux 2.

Both channels of internal Aux 2 (stereo).

The right channel of internal Aux 2.

If the selected signal source is a stereo source - i.e. IN L+R, AUX 1 L+R or AUX 2 L+R - then
the sound program is automatically switched internally to TWIN-MODE regardless of the
TWIN MODE parameter setting so that the input signal is processed in stereo. In this case, the

TWIN parameters PAN SPREAD and LFO PHASE (see appropriate section) are active.

When you select an internal aux path as a signal source, you of course must route the signals
of another PART to this aux path via OUTPUT SELECT before you can establish a signal
connection between the two PARTS. Several PARTs can simultaneously access the external

input or the internal aux paths via INPUT SELECT.