Access virus os4 Manuale Utente
124
CHAPTER
14
The Parameters
also serves as a back/front knob
when you want to create a quadra-
phonic signal.
when you want to create a quadra-
phonic signal.
01111111111111111112
1 SECOND OUTPUT
SELECT OFF≤
SELECT OFF≤
61111111111111111154
BALANCE With this parameter, you
can mix the output signals of the
PARTs individually to the second
output that you chose by means of
the SELECT option. When it is set to
the OFF position, you will only hear
only the conventional output;
when it is set to 127, the signal is
routed exclusively to the second
output. The values in between
these two extremes determine the
weighted balance between the
conventional and the second out-
put.
can mix the output signals of the
PARTs individually to the second
output that you chose by means of
the SELECT option. When it is set to
the OFF position, you will only hear
only the conventional output;
when it is set to 127, the signal is
routed exclusively to the second
output. The values in between
these two extremes determine the
weighted balance between the
conventional and the second out-
put.
In conjunction with the conven-
tional output of the given sound,
you end up with a quadraphonic
signal that is suitable for Surround
applications. Using Panorama (left,
right) and the SECOND OUTPUT
tional output of the given sound,
you end up with a quadraphonic
signal that is suitable for Surround
applications. Using Panorama (left,
right) and the SECOND OUTPUT
Balance (front, back), you can cre-
ate a genuine quadraphonic mix in
the Virus.
ate a genuine quadraphonic mix in
the Virus.
The second output can also serve
as an FX loop. To this end, all you
have to do is connect it to an exter-
nal effects device. The Balance
parameter then serves as an effect
send knob that determines the
balance between the direct or dry
signal and the wet or effect signal.
When you opt to use one of the
aux buses as a second output, the
aux bus can also serve as an FX
loop. You can route the aux signal
to a PART and have the PART pro-
cess this signal further.
as an FX loop. To this end, all you
have to do is connect it to an exter-
nal effects device. The Balance
parameter then serves as an effect
send knob that determines the
balance between the direct or dry
signal and the wet or effect signal.
When you opt to use one of the
aux buses as a second output, the
aux bus can also serve as an FX
loop. You can route the aux signal
to a PART and have the PART pro-
cess this signal further.
If no output has been selected for
SECOND OUTPUT Select (Off), the
Balance parameter is disabled.
SECOND OUTPUT Select (Off), the
Balance parameter is disabled.
01111111111111111112
1 SECOND OUTPUT
BALANCE OFF≤
BALANCE OFF≤
61111111111111111154