Access virus os4 Manuale Utente
152
CHAPTER
16
Parameter of the effects menu
the key you press. The sound pro-
gram can still be played polyphoni-
cally and you can allocate several
different filter frequencies and
independent envelopes simulta-
neously (!) to the input signal via
the keyboard.
gram can still be played polyphoni-
cally and you can allocate several
different filter frequencies and
independent envelopes simulta-
neously (!) to the input signal via
the keyboard.
STATIC Instead of the internal
sound sources, an external signal
source is routed to the filter sec-
tion. In contrast to DYNAMIC
mode, in STATIC mode one or two
voices (depending on the INPUT
SELECT setting, see appropriate
section) of the Virus are activated
automatically without you actually
playing notes on this PART. The fil-
ters and the amplifier are switched
permanently open, the envelopes
are deactivated and incoming
notes are ignored. Consequently
you can use the filters and the
amplifier as an effects section for
the input signal.
source is routed to the filter sec-
tion. In contrast to DYNAMIC
mode, in STATIC mode one or two
voices (depending on the INPUT
SELECT setting, see appropriate
section) of the Virus are activated
automatically without you actually
playing notes on this PART. The fil-
ters and the amplifier are switched
permanently open, the envelopes
are deactivated and incoming
notes are ignored. Consequently
you can use the filters and the
amplifier as an effects section for
the input signal.
TO EFFECTS The audio signal is
routed directly to the effects sec-
tion of the SINGLE program or the
PART. In this mode, the voices of
the Virus are not used, which
means that polyphony remains
fully intact. The filter section is
unavailable in this mode.
tion of the SINGLE program or the
PART. In this mode, the voices of
the Virus are not used, which
means that polyphony remains
fully intact. The filter section is
unavailable in this mode.
01111111111111111112
1 INPUT GLOBAL
Mode Dynamic≤
Mode Dynamic≤
61111111111111111154
Input Select
Selects the external signal source
for the INPUT MODEs.
for the INPUT MODEs.
The signal source that you select
here is used for both the vocoder
and the ring modulator in the
effects section.
here is used for both the vocoder
and the ring modulator in the
effects section.
IN L
The left channel of the external dual audio input.
IN L+R
Both channels of the external dual audio input (stereo).
IN R
The right channel of the external dual audio input.
AUX 1 L
The left channel of internal Aux 1.