Access virus os4 Manuale Utente
204
CHAPTER
21
The Vocoder of the VIRUS
The Carrier Bank
The signal is treated in a similar
way to the signal which passes the
modulator bank. In this case, the
carrier signal is split by the band-
pass filters. Each bandpass of the
carrier bank corresponds to one of
the modulator bank. Usually, both
bandpasses use the same fre-
quency slice. Similar to a synthe-
sizer’s envelope, the signal level
being measured by the envelope
followers of the modulator, is used
to control the level of the carrier’s
filter. Last, but not least, the indi-
vidually controlled signals of the
carrier bank are reunified to create
the vocoder’s output sound.
way to the signal which passes the
modulator bank. In this case, the
carrier signal is split by the band-
pass filters. Each bandpass of the
carrier bank corresponds to one of
the modulator bank. Usually, both
bandpasses use the same fre-
quency slice. Similar to a synthe-
sizer’s envelope, the signal level
being measured by the envelope
followers of the modulator, is used
to control the level of the carrier’s
filter. Last, but not least, the indi-
vidually controlled signals of the
carrier bank are reunified to create
the vocoder’s output sound.
THE PARAMETERS OF
THE VIRUS VOCODER
The Vocoder related parameters
are located in the EFFECT Menu
Vocoder Mode here you can enable
the vocoder and choose the signal
source for the carrier bank at the
same time:
the vocoder and choose the signal
source for the carrier bank at the
same time:
OSC This mode uses the whole
oscillator section of the Virus,
including the noise generator as
the carrier signal. The oscillators
can be played polyphonic which
enables the amplifier envelope to
work as usual. The difference is in
the filter section. The oscillator sig-
nal does not pass the filter section,
as this section is being used to con-
trol the vocoder. It is possible to
feed the vocoder with a single
sound which uses the whole filter
section. Just use the aux-sends in
the multimode to feed the
vocoder’s input with a single
sound created within another mul-
tipart. Use this certain auxiliary
send signal as the carrier signal
within the vocoder.
including the noise generator as
the carrier signal. The oscillators
can be played polyphonic which
enables the amplifier envelope to
work as usual. The difference is in
the filter section. The oscillator sig-
nal does not pass the filter section,
as this section is being used to con-
trol the vocoder. It is possible to
feed the vocoder with a single
sound which uses the whole filter
section. Just use the aux-sends in
the multimode to feed the
vocoder’s input with a single
sound created within another mul-
tipart. Use this certain auxiliary
send signal as the carrier signal
within the vocoder.