Access virus os4 Manuale Utente
276
CHAPTER
24
Appendix
CLASSES
Classes
p: Performance Controller Accessi-
ble by Control message. Perfor-
mance Controllers are not stored
with a Single-Sound. If more than
one Multi Part is set to the same
MIDI channel, all Parts on this MIDI
channel receive the same Perfor-
mance Controllers.
ble by Control message. Perfor-
mance Controllers are not stored
with a Single-Sound. If more than
one Multi Part is set to the same
MIDI channel, all Parts on this MIDI
channel receive the same Perfor-
mance Controllers.
a: Sound Parameter of Bank A
Accessible by Control message,
SysEx-Parameterchange and Sin-
gle-Dump.The Sound Parameters
are stored with a Single Sound.
When received as Control Mes-
sage, the Sound Parameter is
received only by the Multi Part
with the lowest part number, if
more than one Multi Part is set to
the same MIDI channel. When
received as SysEx-Parameter-
change or Single-Dump, the part is
addressed by the part number irre-
spective of the actual MIDI chan-
nel setting.
Accessible by Control message,
SysEx-Parameterchange and Sin-
gle-Dump.The Sound Parameters
are stored with a Single Sound.
When received as Control Mes-
sage, the Sound Parameter is
received only by the Multi Part
with the lowest part number, if
more than one Multi Part is set to
the same MIDI channel. When
received as SysEx-Parameter-
change or Single-Dump, the part is
addressed by the part number irre-
spective of the actual MIDI chan-
nel setting.
b: Sound Parameter of Bank B
Accessible by MIDI Polyphonic
Pressure, SysEx-Parameterchange
and Single-Dump.The Sound
Parameters are stored with a Sin-
gle Sound. When received as Poly-
phonic Pressure, the Sound
Parameter is received only by the
Multi Part with the lowest part
number, if more than one Multi
Part is set to the same MIDI chan-
nel. When received as SysEx-
Parameterchange or Single-Dump,
the part is addressed by the part
number irrespective of the actual
MIDI channel setting.
Accessible by MIDI Polyphonic
Pressure, SysEx-Parameterchange
and Single-Dump.The Sound
Parameters are stored with a Sin-
gle Sound. When received as Poly-
phonic Pressure, the Sound
Parameter is received only by the
Multi Part with the lowest part
number, if more than one Multi
Part is set to the same MIDI chan-
nel. When received as SysEx-
Parameterchange or Single-Dump,
the part is addressed by the part
number irrespective of the actual
MIDI channel setting.
m: Multi Parameter Accessible by
SysEx-Parameterchange and Multi-
Dump The Multi Parameters are
stored with a Multi Patch.
SysEx-Parameterchange and Multi-
Dump The Multi Parameters are
stored with a Multi Patch.
ms: Multi/Single Parameter When
in Single Mode, the parameter is
received and stored with the Single
Sound.When in Multi Mode, the
parameter is received and stored
with the Multi Patch. In Multi
Mode the Single Sound settings
are ignored while the correspond-
ing Multi Patch settings are active.
in Single Mode, the parameter is
received and stored with the Single
Sound.When in Multi Mode, the
parameter is received and stored
with the Multi Patch. In Multi
Mode the Single Sound settings
are ignored while the correspond-
ing Multi Patch settings are active.