Access os5 Manuale Utente
ACCESS VIRUS OS5
163
System Exclusive Data
CONTROL CHANGE MESSAGE (ONLY
PAGE A)
PAGE A)
Bc
Status byte,
c=MIDI channel
c=MIDI channel
nn
Parameter Number 0..127
(see parameter list Page A)
(see parameter list Page A)
vv
Parameter Value 0..127
see parameter list Page A)
see parameter list Page A)
The Control Change messages are defined
as Performance Controller (e.g. Modulation
Wheel or Hold Pedal) or Sound Parameters (e.g.
Cutoff or Patch Volume). The Performance Con-
trollers are not stored with a Single-Sound. If
more than one Multi Part is set to the same MIDI
channel, all Parts on this MIDI channel receive
the same Performance Controllers. The Sound
Parameters are stored with a Single Sound. If
more than one Multi Part is set to the same MIDI
channel, the Sound Parameter is receiced only
by the Multi Part with the lowest part number.
Wheel or Hold Pedal) or Sound Parameters (e.g.
Cutoff or Patch Volume). The Performance Con-
trollers are not stored with a Single-Sound. If
more than one Multi Part is set to the same MIDI
channel, all Parts on this MIDI channel receive
the same Performance Controllers. The Sound
Parameters are stored with a Single Sound. If
more than one Multi Part is set to the same MIDI
channel, the Sound Parameter is receiced only
by the Multi Part with the lowest part number.
Example: B0,21,40 Set oscillator balance (21
hex = 33 dec) on MIDI channel 1 to the middle
position (40 hex =64 dec).
hex = 33 dec) on MIDI channel 1 to the middle
position (40 hex =64 dec).
POLYPHONIC PRESSURE MESSAGE
(ONLY PAGE B)
(ONLY PAGE B)
Ac
Status byte, c=MIDI channel
nn
Parameter Number 0..127
(see parameter list Page B)
(see parameter list Page B)
vv
:Parameter Value 0..127
see parameter list Page B)
see parameter list Page B)
Example: A2,07,25 Control LFO3 Rate on MIDI
channel 3 (!).
channel 3 (!).
SYSTEM-EXCLUSIVE-MESSAGE
F0
Start of System Exclusive
00
Manufacturer ID 1
Access Music Electronics
Access Music Electronics
20
Manufacturer ID 2
Access Music Electronics
Access Music Electronics
33
Manufacturer ID 3
Access Music Electronics
Access Music Electronics
01
Product ID (VIRUS)
dd
Device ID
00..0F
individual; 10: omni.
...
[message]
F7
End of System Exclusive
SYSEX PARAMETERCHANGE
[message]=
7x
7x
Parameterchange
70:page A;
71:page B;
72:page C:
70:page A;
71:page B;
72:page C:
pp
Part number
00..0F
00..0F
Multi part 1..16;
40: Single
nn
Parameter Number
0..127
0..127
(see parameter list)
vv
Parameter Value
0..127
(see parameter list)
{F0,00,20,33,01,dd,7x,pp,nn,vv,F7}
The SysEx Parameterchange affects one of
the sixteen single edit buffer in Multi Mode ad-
dressed by the part number (00..0F) or the Sin-
gle buffer in Single Mode (part number 40). If a
global parameter or a Multi parameter is ac-
cessed, which is not part-sensitive (e.g. Input
Boost or Multi Delay Time), the part number is
ignored.
dressed by the part number (00..0F) or the Sin-
gle buffer in Single Mode (part number 40). If a
global parameter or a Multi parameter is ac-
cessed, which is not part-sensitive (e.g. Input
Boost or Multi Delay Time), the part number is
ignored.