Access os5 Manuale Utente

CHAPTER 5
Concept and Operation

 

The VIRUS gives you the option of classing the
stored SINGLE sounds in categories. With the
benefit of these categories, you’ll be able to find
a desired sound much faster.

You have the following categories at your dis-
posal:

 

Every SINGLE sound can be assigned to up to
two categories by means of the parameters
CATEGORY 1 and CATEGORY 2. For example,
you could assign the attributes "Bass" and "Ac-
id" or "Lead" and "Favorite 1" to a given sound.
These categories may be changed at any time
and can be stored along with the sound. The
factory sounds are assigned default categories.

Once you’ve assigned categories, you can
search for the sounds within a specific category
in SINGLE mode and MULTI-SINGLE mode: 

Press and hold the SINGLE button, then use the
PARAMETER buttons to select the category in
which you want to search for sounds. Hold the
SINGLE button down and use the VALUE but-
tons to select sounds that are assigned to the

currently selected category. It doesn’t matter if
this sound has been assigned to the category
via CATEGORY 1 or CATEGORY 2; in either
case, it will show up in the list. While you’re se-
lecting sounds, SINGLEs that don’t belong to
the currently selected category are simply
skipped over when you hold the SINGLE button
down.

 

For every SINGLE program and every PART,
you can access up to six different stereo effects
individually. You’ll find these effects – RING-
MODULATOR, DISTORTION, ANALOG BOOST,
EQUALIZER, PHASER and CHORUS – in the
EFFECTS menu. In MULTI mode, you thus have
a total of 98 simultaneously available effects.

The the Delay/Reverb section is available just
once, but you can address it individually via the
PARTs’ Effect Send parameter. In the signal
path, all effects are connected in series in ac-
cordance with their sequence in the Effects
menu.

Each SINGLE program contains its own set-
tings for the Delay/Reverb section. In MULTI
mode, the sound programs involved share the
same delay/reverb section. For this reason, the
parameter values are determined by the set-
tings of the currently active MULTI program.

SINGLE

SINGLE

MULTI

MULTI

MULTISINGLE

MULTISINGLE