Acronis Backup Recovery 10 Server for Windows Manuale Utente
Copyright © Acronis, Inc., 2000-2009
71
Re-attempt, if an error occurs
The preset is: Enabled. Number of attempts: 5. Interval between attempts: 30 seconds.
When a recoverable error occurs, the program re-attempts to perform the unsuccessful operation.
You can set the time interval and the number of attempts. The attempts will be stopped as soon as
the operation succeeds OR the specified number of attempts is performed, depending on which
comes first.
You can set the time interval and the number of attempts. The attempts will be stopped as soon as
the operation succeeds OR the specified number of attempts is performed, depending on which
comes first.
For example, if the network location becomes unavailable or not reachable, the program will attempt
to reach the location every 30 seconds, but no more than 5 times. The attempts will be stopped as
soon as the connection is resumed OR the specified number of attempts is performed, depending on
which comes first.
to reach the location every 30 seconds, but no more than 5 times. The attempts will be stopped as
soon as the connection is resumed OR the specified number of attempts is performed, depending on
which comes first.
3.3.2.7.
Additional settings
Specify the additional settings for the recovery operation by selecting or clearing the following check
boxes.
boxes.
Set current date and time for recovered files
This option is effective only when recovering files.
The preset is Enabled.
This option defines whether to recover the files’ date and time from the archive or assign the files the
current date and time.
current date and time.
Validate backup before recovery
The preset is Disabled.
This option defines whether to validate a backup to ensure that the backup is not corrupted, before
data is recovered from it.
data is recovered from it.
Check file system after recovery
This option is effective only when recovering disks or volumes.
When operating under bootable media, this option is not effective for the NTFS file system.
The preset is Disabled.
This option defines whether to check the integrity of the file system after a disk or volume recovery.
Restart machine automatically if it is required for recovery
This option is effective when recovery takes place on a machine running an operating system.
The preset is Disabled.
The option defines whether to reboot the machine automatically if it is required for recovery. Such
might be the case when a volume locked by the operating system has to be recovered.
might be the case when a volume locked by the operating system has to be recovered.