Acronis Backup & Recovery 10 Advanced Server SBS Edition Manuale Utente
95
Copyright © Acronis, Inc., 2000-2010
Note: Acronis Backup & Recovery 10 Online supports only HTTP and HTTPS proxy servers.
Proxy settings for the agent and the management server are configured separately, even if both are
installed on the same machine.
installed on the same machine.
To set up proxy server settings
1. Select the Use a proxy server check box.
2. In Address, specify the network name or IP address of the proxy server—for example:
2. In Address, specify the network name or IP address of the proxy server—for example:
proxy.example.com or 192.168.0.1
3. In Port, specify the port number of the proxy server—for example: 80
4. If the proxy server requires authentication, specify the credentials in User name and Password.
5. To test the proxy server settings, click Test connection.
4. If the proxy server requires authentication, specify the credentials in User name and Password.
5. To test the proxy server settings, click Test connection.
3.3 Machine options
The machine options define the general behavior of all Acronis Backup & Recovery 10 agents
operating on the managed machine, and so the options are considered machine-specific.
operating on the managed machine, and so the options are considered machine-specific.
To access the machine options, connect the console to the managed machine and then select
Options > Machine options from the top menu.
Options > Machine options from the top menu.
3.3.1 Machine management
This option defines whether the machine has to be managed centrally by the Acronis Backup &
Recovery 10 Management Server.
Recovery 10 Management Server.
To be able to use this option, you must be logged on as a member of the Administrators group on
the machine.
the machine.
You have the opportunity to register the machine on the management server when installing an
Acronis Backup & Recovery 10 agent. If the machine is not registered, selecting Centralized
management here will initiate the registration (p. 408). Or you can add the machine to the
management server on the server side. Any of the three registration methods require the server
administrator privileges.
Acronis Backup & Recovery 10 agent. If the machine is not registered, selecting Centralized
management here will initiate the registration (p. 408). Or you can add the machine to the
management server on the server side. Any of the three registration methods require the server
administrator privileges.
Selecting Stand-alone management on a registered machine will result in the machine stopping
communication with the server. On the management server, the machine appears as Withdrawn.
The management server administrator can delete the machine from the server or register the
machine once again.
communication with the server. On the management server, the machine appears as Withdrawn.
The management server administrator can delete the machine from the server or register the
machine once again.
The preset is: Stand-alone management.
To set up centralized management on the machine:
1. Select Centralized management.
2. Specify the Management Server IP/Name.
3. Specify the user name and password of the management server administrator on prompt.
4. In the Machine's registration address, select how the machine will be registered on the
2. Specify the Management Server IP/Name.
3. Specify the user name and password of the management server administrator on prompt.
4. In the Machine's registration address, select how the machine will be registered on the
management server: by its name (recommended) or by its IP address.
5. Click OK and the machine will be registered on the management server.
To disable centralized management, select Stand-alone management.