ademco vista-20p Manuale Utente

– 12 –

Functions of the Keypads

(cont’d)

NOTE: The functions printed directly on

the keys indicate their primary purpose; the
functions printed under some of the keys
(shown in brackets under the respective
key), indicate their alternate or secondary
purpose.

1. DISPLAY

WINDOW

Alpha Display Keypads: 2-line, 32-

character Liquid Crystal Display (LCD)
keypads that display protection point
identification, system status, and
messages.

Fixed-Word Display Keypads:

Display protection zone ID and system
status messages using pre-designated
words in the LCD display area.

2. 1

OFF

Disarms burglary portion of

the system,

silences alarms and

audible trouble indicators, and clears
visual display after problem's
correction.
[RECORD] On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to record up to a 2.5-
minute message.

3. 2

AWAY

Arms the entire burglary

system, perimeter and interior.
[VOLUME] On Voice keypads, used in
conjunction with the FUNCTION and
desired volume control keys

↑ [3] or ↓

[6] to adjust the volume of a recorded
message or voice system status.

4. 3

STAY

Arms perimeter portion of

burglary system only. Interior
protection is not armed, allowing
movement within premises without
causing an alarm.

[PLAY] On Voice keypads, used in

conjunction with the FUNCTION and
VOICE keys to play the recorded
message.
[ ↑ ] On Voice keypads, used in

conjunction with the FUNCTION and
VOLUME keys to raise the message
and voice system status volume.

5. 4

MAX

Arms the entire burglary

system, perimeter and interior, but
without entry delay feature. Entering
via an entry/exit door will cause an
alarm.

6. 5

TEST

Tests the system and alarm

sounder if disarmed. Refer to Testing
The System section for test procedures.

7. 6

BYPASS

Removes individual

protection zones from being monitored
by the system.
[ ↓ ] On Voice keypads, used in

conjunction with the FUNCTION and
VOLUME keys to lower the message
and voice system status volume.

8. 7

INSTANT

Arms in manner similar to

the STAY mode, but without the entry
delay feature.

Entering via an entry/exit door will

cause an alarm.

9. 8

CODE

Used to assign additional user

codes for other users of the system.

10. 9

CHIME

Turns CHIME mode on and

off. When on, the opening of windows or
doors while the system is disarmed will
sound 3 beeps at the keypad(s).