Acronis true image server 8.0 Manuale Utente

Transferring the system to a new disk 

 

 

44

 

Copyright © Acronis, Inc., 2000-2005 

•  Create new partitions on the old disk (and remove all the older information.) 

 

On program screens, damaged partitions are marked with a red circle and a white cross 

inside in the upper left corner. Before you start cloning, you should check such disks for 
errors using corresponding operating system tools. 

Please note the following: if the power goes out or you accidentally press RESET 
during the transfer, the procedure will be incomplete and you will have to partition 
and format or clone the hard disk again. 
No data will be lost because the original disk is only being read (no partitions are 
changed or resized) until data transfer is completed.  
Nevertheless, we don’t recommend you to delete data from the old disk until you 
are sure it is correctly transferred to the new disk, server boots up from it, and all 
applications work. 

You will see the Clone mode window just after the welcome window. 

 

We recommend using automatic mode in most cases. The manual mode can be 
helpful, if you need to change the disk partition layout. 
If the program finds two disks, one partitioned and another unpartitioned, it will 
automatically recognize the source (partitioned) and destination (unpartitioned) disks, 
so the next two steps will be bypassed.