ademco vista-100 Manuale Utente

¥ A user may not delete or change the user code of the SAME or

HIGHER authority than which he is assigned.

¥ A user may only ADD users to a LOWER authority level.
¥ A user may assign access codes only to those partitions to

which the user adding the code has access. (ex. a user with
access to only partition 1 cannot assign codes in partition 2.)

¥ The only way to assign a user's authority level is by using the

"Add A User" procedure. To change a user's authority level,
that user must first be deleted, then added again.

¥ A user can only be DELETED or CHANGED from within the

partition he is assigned.

¥ User numbers must be entered as 3-digit entries. One- or two-

digit user numbers must be preceded by a "0" (example, 003,
004, etc.). Security codes are entered as 4-digit numbers.

¥ Before assigning a security code, be sure it does not conflict

with any DURESS code.

Note: When adding, changing or deleting users, all other alpha
keypads in that partition will display "User Edit Mode Ð Please
Stand By", and key depressions (except Panic) at those
keypads will be ignored. Panic key depressions will cause an
alarm and terminate user entry.

You can exit any of the user edit modes described on the
following pages at any time by doing the following:

1. Press either  ✱  or  # , or don't press any key for 10 seconds.

2. System returns to normal mode.