APart CMX20T-BL Dépliant
TECHNICAL SPECIFICATIONS
APart CMX20T
CEILING SPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The APart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass
response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to
4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the
CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings. The
loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the
loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of
microphone calls and backgroundmusic at a higher volume level.
response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to
4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the
CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings. The
loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the
loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of
microphone calls and backgroundmusic at a higher volume level.
The housing is made of high quality ABS. Because of the special enforced polypropylen woofer with
rubber edge and aluminium grille, this speaker can be used in humid environments.
rubber edge and aluminium grille, this speaker can be used in humid environments.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden
behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
This speaker is standard available in white, black and silver colour. From 12 pieces on, the
loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
CMX20T
behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
This speaker is standard available in white, black and silver colour. From 12 pieces on, the
loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
CMX20T
white colour
RAL 9010
CMX20T-BL
black colour
RAL 9011
CMX20T-SLV
silver colour
RAL 9006
Type
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Rated
Music
Music
100 V
Rated
Music
Music
SPL
1 watt/1 m
Max peak
Frequency Range
Dispersion @ 1 kHz
4 kHz
8 kHz
Dimensions
Frequency Range
Dispersion @ 1 kHz
4 kHz
8 kHz
Dimensions
Outside dia
Cutout dia
Depth
Cutout dia
Depth
Weight
2-way HiFi Pro
8” enforced PP, rubber edge
1” silk dome
16 Ohm / 100V
2,5 - 5 - 10 - 20 watt (4k - 2k - 1k - 500 Ohm)
60 watt
100 watt
20 watt
32 watt
93 dB
110 dB
50 Hz - 20 kHz
180°
80°
45°
244 mm
220 mm
90 mm
1.4 Kg
8” enforced PP, rubber edge
1” silk dome
16 Ohm / 100V
2,5 - 5 - 10 - 20 watt (4k - 2k - 1k - 500 Ohm)
60 watt
100 watt
20 watt
32 watt
93 dB
110 dB
50 Hz - 20 kHz
180°
80°
45°
244 mm
220 mm
90 mm
1.4 Kg