Infocus IN3914 Manuale Utente

Turn on projector and source

   Connect the power cord to the projector 

and to an electrical outlet

The power light    on the projector will light amber.

   Remove the lens cap

   Turn on the projector

Touch the power light (or press power on the remote).
The power light will start blinking green.

   Wait for the lamp to warm up

After a few seconds, the power light will stop blinking, and 
the other buttons on the keypad will light up. It can take a 
minute for the lamp to reach full brightness.

Warning: Do not look directly into the lens while 
the projector is being used.

  Turn on computer or other source

If your computer is connected to the USB Display connector, 
follow the instructions on your computer's screen. Otherwise, 
you may need to press a specific key combination to activate 
your laptop's external video port. On most laptops, hold 
down the FN key while pressing a key labeled CRT/LCD, LCD/
VGA, a monitor icon 

 , or similar. Key combos for popular 

models:

Apple F7                     HP/Compaq Fn+F4 or Fn+F6 

Sony Fn+F7        

Dell Fn+F8                 IBM ThinkPad Fn+F7      

Toshiba Fn+F5

Fujitsu Fn+F10      

Complete laptop activation chart at www.infocus.com/support

Important: If there is still no video, restart your 
computer (first make sure it's connected to the 
projector and the projector is turned on).

   Change source if needed

If needed, press source (on the projector or remote) and the 
select button to choose a different source. 

i

5-10 sec.

USB A

USB mini B