CyberResearch cpex p4-24-x Manuale Utente

 

©Copyright 2005 CyberResearch, Inc. 

 
 

   

(See Appendix B for detail pin assignments) 

You can attach up to two IDE (Integrated Drive Electronics) drives to the CPEX 
series built-in controller. CPEX series Ultra DMA100 IDE supports data transfer up to 
100MB/s. Ultra DMA 100 IDE drive must be equipped with Ultra DMA 100 cable, for 
optimum performance. 
 

 

You can attach up to two floppy disk drives to the CPEX series onboard controller. 
You can use 3.5" (360KB, 720KB, 1.2MB, 1.44MB and 2.88MB) drives. The 
motherboard comes with a 34-pin daisy-chain drive connector cable. On one end of 
the cable is a 34-pin flat-cable connector. On the other end are two sets of 34-pin 
flat-cable connector (usually used for 3.5" drives). The set on the end (after the 
twist in the cable) connects to the A: floppy drive. The set in the middle connects to 
the B: floppy drive. 
Please connect the red power connector wire to the pin1 position.