Alcatel-Lucent speedtouch 500 Manuale Utente
330
PPTP Commands
pptp ifadd
Adds a Point-to-Point Tunneling Protocol (PPTP) profile (backwards compatible with previous release, use profiles
instead).
instead).
SYNTAX:
pptp ifadd
dest = <string>
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
dest
The WAN destination for this PPTP tunnel. Typically a phonebook entry.
REQUIRED
rate
A number between 10 and 10000.
Represents the transmit speed in bits/s for the WAN link.
Represents the transmit speed in bits/s for the WAN link.
OPTIONAL
encaps
The type of WAN encapsulation.
Choose between:
Choose between:
•
vcmux
•
nlpid - Network Layer Protocol IDentifiers (NLPID)
OPTIONAL
ac
The High-level Data Link Control (HDLC) framing option applicable to
PPTP interfaces using this PPTP profile.
Before relaying the encapsulated PPP frames over the PPPoA link, make
sure that the address and control field (0xFF03) is always in front of the
frames (always), make sure the address and control field will never be
found in front of the frames (never) or do not change the frames arriving
via the PPTP tunnel (keep).
By default the address and control field is never sent (compliant to
RFC2364). It is recommended to keep this setting.
PPTP interfaces using this PPTP profile.
Before relaying the encapsulated PPP frames over the PPPoA link, make
sure that the address and control field (0xFF03) is always in front of the
frames (always), make sure the address and control field will never be
found in front of the frames (never) or do not change the frames arriving
via the PPTP tunnel (keep).
By default the address and control field is never sent (compliant to
RFC2364). It is recommended to keep this setting.
OPTIONAL