Alcatel-Lucent omniacces-voip gateway Manuale Utente
VoIP Commands
Page 5-82
Command Usage
Specify Ear & Mouth signaling time for transition (debounce) to off-hook.
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em off hook debounce
voice signaling channel <
slot/port/startChannel-endChannel
> em off hook debounce <
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the E&M debounce (delay interval) transition to off-hook (dial tone) state in milli-
seconds from 5 to 1,000, (e.g.,
seconds from 5 to 1,000, (e.g.,
50
).
♦ Syntax Note ♦
Do not use commas when entering the E&M off-hook debounce
transition value (for example,
transition value (for example,
1,000
will return a syntax error
message).
Default:
The default value is
The default value is
50
.
Command Examples:
voice signaling channel 2/1/1-12 em off hook debounce 50
voice signaling channel 2/2/13-24 em off hook debounce 5
voice signaling channel 2/3/1-30 em off hook debounce 1000
voice signaling channel 2/2/13-24 em off hook debounce 5
voice signaling channel 2/3/1-30 em off hook debounce 1000