Manualsbrain.com
  1. Manuali
  2. Marche
  3. Alcatel-Lucent
  4. one touch 995
  5. Manuale Utente

Alcatel-Lucent one touch 995 Manuale Utente

Scarica
Pagina di 77
67
68
Getting connected
6 
 ..............
To connect to the internet with this phone, you can use GPRS/EDGE/3G 
networks or Wi-Fi, whichever is most convenient.
Connecting to the Internet
6.1 
GPRS/EDGE/3G
6.1.1 
The first time you turn on your phone with SIM card inserted, it will 
automatically configure network service: GPRS, EDGE or 3G. 
To check the network connection you are using, touch the Application 
tab from the Home screen, then touch Settings\Wireless & networks\
Mobile networks\Network settings\Network operators or Access 
Point Names.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone 
with the following steps:
Touch the Application tab from the Home screen.
• 
Touch 
• 
Settings\Wireless & networks\Mobile networks\Network 
settings\Access Point Names.
Then press 
• 
Menu key and touch New APN. 
Enter the required APN information.
• 
When finished, press 
• 
Menu key and touch Save.  
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service. 
Touch the Application tab from the Home screen.
• 
Touch 
• 
Settings\Wireless & networks\Mobile networks\Data 
roaming.
Mark/Unmark the checkbox to activate or deactivate data roaming.
• 
When Data roaming is deactivated, you can still perform data exchange 
• 
with a Wi-Fi connection (refer to section 6.1.2 Wi-Fi).
To limit your data connection to 2G networks only
To save battery and extend battery life, you can set to activate 2G 
networks (GPRS or EDGE) only.
Touch the Application tab from the Home screen.
• 
Touch 
• 
Settings\Wireless & networks\Mobile networks\Network 
settings\Network mode.
Touch 
• 
2G only in the dailog that opens.