Alesis midiverb2 quicksetup Manuale Utente

QUICK

 

SETUP

n 

Connect your source (instrument, mic, mixer) to either of

MIDIVERB II's inputs; both inputs if you have a stereo signal.

n 

Connect the MIDIVERB II outputs to your instrument amp(s)

or stereo mixer returns.

n

 

Set the MIX control to 50/50

n 

Start the source

 signal.

n 

Turn the INPUT control clockwise until the green SIGNAL

LED stays on (when signal is present) and the red OVLD
(overload) LED flashes occasionally on peaks.

n 

Turn the OUTPUT control clockwise to the volume level you desire.

n 

Change Programs manually by pressing any two numbered

buttons 00-99

n 

Set the MIDI receive channel: Press CHAN followed by two

numbered buttons 01-l 6.

n 

Assign Programs to MIDI Patch numbers:

Press PATCH followed by two numbered buttons 01-32.
Press PRGM followed by two numbered buttons 
Hold STORE and press PATCH.

n 

The system always reverts to Program mode (PRGM LED on).