Aopen ax3l Manuale Utente

Use this function to exit Setup without saving the CMOS value changes.  Do 
not use this option if you want to save the new configuration.   

The NCR 53C810 SCSI BIOS resides in the same flash memory chip as the 
system BIOS.  The onboard NCR SCSI BIOS is used to support NCR 53C810 
SCSI control card without BIOS code. 
The NCR SCSI BIOS directly supports DOS, Windows 3.1 and OS/2.  For 
better system performance, you may use the drivers that come with the NCR 
SCSI card or with your operating system.  For details, refer to the installation 
manual of your NCR 53C810 SCSI card. 

AOpen Easy Flash is more user friendly than traditional flash method. The 
BIOS binary file and flash routine are combined together and you simply run a 
single file to complete the flash process.  

1.  Get new BIOS upgrade program from AOpen's web site. For example, 

AX3L200.EXE. 

2.  Reboot the system to DOS mode without loading any memory handler (such as 

EMM386) or device driver. It needs around 520K free memory space. 

3.  Execute  A:> AX3L200 

DO NOT turn off the power during FLASH PROCESS. 

4.  Reboot the system by turn off the power after flash is completed. 
5.  Reload the "BIOS SETUP DEFAULT" and reconfigure other items as 

previous set. Save & Exit. Done! 

Note: The upgrade of new BIOS will permanently 
replace your original BIOS content after flashing. 
The original BIOS setting and Win95/Win98 PnP 
information will be refreshed and you probably 
need to re-configure your system.