ASUS m4a785td-v evou3s6 Manuale Utente

2-16

Chapter 2: BIOS information

The following items only appear when a USB storage device is plugged in.

USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]

Sets the maximum time that the BIOS waits for the USB storage device to initialize.

Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Configuration options: [Auto] [Floppy]

[Forced FDD] [Hard Disk] [CDROM]

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Configuration and

Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then

press <Enter> to display the configuration options.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Suspend Mode [Auto]

ACPI 2.0 Support

[Disabled]

ACPI APIC support

[Enabled]

APM Configuration

HW Monitor Configuration

Select the ACPI state

used for System

Suspend.

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Power Settings

2.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB flash

drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed

(12Mbps). Configuration options: [FullSpeed] [HiSpeed]