ASUS wl-320ge Manuale Utente

Follow these steps:
1.  Ensure that your WLAN Card has the same specifications as the WLAN Access 

Point.

2.  Move the devices closer together. The ASUS WLAN Card may be out of range 

of the ASUS AP.

3.  Ensure that the ASUS AP and ASUS WLAN Card have the same SSID.

4.  If encryption is enabled, ensure that both the ASUS AP and the ASUS WLAN 

Card have the same encryption settings.

5.   Ensure that the ASUS AP’s Air and Link LEDs are solid green. 

6.  Ensure that the MAC address of your ASUS WLAN card is in the “Accept” list 

in your Access Control List. For more details, refer to the section 3..3 Access 

Control in this user manual.

7.  Ensure that your ASUS 802.11g AP is set to Access Point mode.

8.  Ensure that both the ASUS AP and the ASUS WLAN card have the same 

preamble mode. 

To achieve maximum throughput, verify that your antennas are well-placed, 

not behind metal, and do not have too many obstacles between them. If you 

move the client closer to the ASUS AP and throughput increases, you may 

want to consider adding a second ASUS AP and implementing roaming.

Check antenna, connectors and cable connections.
Verify network traffic does not exceed 37% of bandwidth.
Ensure that the wired network does not exceed ten broadcast messages per 

second.

Verify wired network topology and configuration.

•

•
•
•

•

Ensure that your client or computer and the ASUS AP have the same subnet. The 
default subnet of the ASUS AP is 192.168.1.1

Refer to the section 3.9.2 Firmware Upgrade on this user manual.