att 1430 Manuale Utente
4
When you finish entering the name,press
or
.
The screen displays
.
5
Enter the telephone number. Use
to backspace and make
a correction. Press
to store a pause in the dialing
sequence.
—OR—
Press
—OR—
Press
to display the last number dialed from
this phone.
6
Press
or
. The screen displays
and the current setting.
7
Press
or
to change the setting. Choose (for Yes) if you
wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose (for
NO) for a normal ringing pattern.
to a distinctive ringing pattern after the first ring. Choose (for
NO) for a normal ringing pattern.
8
Press
or
to confirm your selection. If you chose
in Step 7, a
will be displayed with the directory entry.
Note: When memory is full the screen displays
, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
delete a stored number.
Edit a Number/Name Stored in the Directory
1
Press
(DIR). The screen displays
.
2
Press
or
to scroll alphabetically through entries
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3
When the screen displays the number you want to edit,press
. Then press
or
until
flashes.
4
Press
. The screen displays the name and number. The
flashing cursor appears at the end of the name. Use ,
and
the dial pad keys to edit the name. Press
to move on to
edit the number. Press
to move to edit the Distinctive
Ring setting.
5
Press
to save the edited information.
PM
OLD
TELEPHONE DIRECTORY
14
1430_book_2ATT-mk1(DEC21) 5/16/02 5:47 PM Page 14