att 265 Manuale Utente

 

 

When your telephone left the factory, the dial mode was set to tone. If you do not have 

touch tone dialing service, you can change this setting to PULSE by following these steps: 

 

1.  After setting the call waiting feature, press OPTIONS once (or from the idle 

screen, press OPTIONS ten times), the screen will show: 

 

2. Press 

the 

T

 and S keys to toggle between TONE and PULSE. 

3.  When the desired dial mode is displayed on the screen, press OPTIONS to save 

your selection and exit the options menu.  

 

NOTE: If you have pulse dial (rotary) service, you can switch to touch tone dialing 

during a call by pressing *. This can be useful if you need to send tone signals to access 
answering systems or long distance services. 

After hanging up or pressing FLASH, the telephone automatically returns to its original 

dial mode.