att 272 Manuale Utente

If this telephone does not work properly, try the following suggestions before
seeking repair assistance.  If the telephone still does not work,
call 1 800 222–3111.

•

Make sure all plugs are connected properly.  Check the line cord
connections at the modular jack and at the telephone.  Also check the
coiled handset cord connection at both ends.

•

Make sure you’ve selected Line 1 or Line 2.

•

Make sure that Hold is not activated.

•

Unplug the telephone and connect it to another modular jack.  If it still
does not work, and other telephones in your home are working, the
problem is with this telephone.

•

This product comes set for touch tone (

TT) dialing.  Make sure you

choose the correct dialing mode (

TT/DP); touch tone dialing will not

work if you have dial pulse service.

•

If you just used Temporary Tone, leave the handset on the base for a few
seconds before making another call.

•

Review “Storing Memory Numbers” in the TELEPHONE MEMORY section
of this manual to make sure you are pressing the correct sequence of
buttons.

•

If you are interrupted by a recorded announcement telling you to hang
up (or a loud buzzing noise), hang up and try to enter the number more
quickly.

•

Try calling the number you want to enter into memory.  When the call is
ended:
1

Press 

p.

Press a memory location button 

, 

 or 

— OR —
Press 

m and the memory location (1–9) where you want to store

the number.

•

If someone lifts an extension phone while you’re storing numbers in
memory, the process might be interrupted.  Make sure all extensions are
on hook while storing numbers in memory.

•

If the number is more than 21 digits long, make sure you follow the
directions for “Dialing Long Numbers” in the TELEPHONE MEMORY
section of this manual.

•

Do not put the phone on hold while storing numbers in memory.