att 9452 Manuale Utente
4
Check for dial tone.
After the batteries are charged, pick up the handset, press
After the batteries are charged, pick up the handset, press
L, and
listen for a dial tone. Then press
l. If you don’t hear a dial tone, see
“IN CASE OF DIFFICULTY.”
Wall Installation
1
Position the wall mount adapter on the base.
2
Connect the power cord to the phone.
Use only the power cord supplied with this product. If you
need a replacement, call 1 800 222-3111.
need a replacement, call 1 800 222-3111.
3
Connect the telephone line cord(s). See illustrations on previous
page for connections. Use the short line cord instead of a long line
cord for the connection to the L1/L1+L2 phone jack.
page for connections. Use the short line cord instead of a long line
cord for the connection to the L1/L1+L2 phone jack.
INSTALLATION
7
Align tabs on wall mount
adapter with holes on bottom
of base. Snap wall mount
adapter firmly into place.
adapter with holes on bottom
of base. Snap wall mount
adapter firmly into place.
Wall mount
adapter
adapter
9452_book_1ATT 10/5/00 3:17 PM Page 7