Audiovox 128-7345 Manuale Utente
~1~
MATERIALS INCLUDED IN THIS PACKAGE:
1)
Over Head Docking Station – (1 pc)
DS7 (P/N 136-3952) / DS85 (P/N 136-3953) / DS102 (P/N 136-3954) - (1pc)
DS7 (P/N 136-3952) / DS85 (P/N 136-3953) / DS102 (P/N 136-3954) - (1pc)
2)
Lamp Harness (P/N 112B3110) – (1 pc)
3)
2 Pin Power Wire Harness with choke (P/ N 112B3143) – (1 pc)
4)
Hardware Package
Screws (#4) – (8 pcs)
Self Drilling Screws (#8) – (4 pcs)
Screws (M5) – (4 pcs)
Nut (M5) – (4 pcs)
Washer – (4 pcs)
Self Drilling Screws (#8) – (4 pcs)
Screws (M5) – (4 pcs)
Nut (M5) – (4 pcs)
Washer – (4 pcs)
5) Trim Ring (DS102=P/N 102-4110) (DS85=P/N 102-4124) (DS7=P/N 102-4125) – (1 pc)
6)
6)
Mounting Bracket (DS7 & DS85 P/N 108-3856) (DS102 P/N 108-3865) – (1 pc)
TOOLS REQUIRED:
Nut Driver / Socket Wrench
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary
from vehicle to vehicle)
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary
from vehicle to vehicle)