Axis 20443r2 Manuale Utente

The internal microphone or other audio equipment should now be configured:

1. From the setup tools, open the Audio settings page and check the Enable box.
2. Select the input you connected your external equipment to (external line or external 

mic), or select Internal Microphone. Note that this is the logical connector. All of these 

options connect via the Audio In connector on the rear panel.

3. Some microphone types require their own (external) voltage supply to operate 

correctly. These types are condenser microphones and Electret microphones. If using 

one of these types of microphone, and it is not battery powered, check the box 

External Mic Power. This option should not be enabled when using a dynamic or 

battery powered microphone, as this will result in decreased sound quality.

4. Set the desired audio quality, and set the Mic Input Sensitivity according to your 

microphone. Click Save and then return to the Live View page to check that audio is 

available. See also the audio settings section on page 20.

Upon delivery, the AXIS 230 is supplied with one pre-configured Administrator user name and password, 
set to root and pass, respectively. The Administrator password should be changed as soon as possible, to 
prevent unauthorized access to the setup tools and/or the video stream. 

Start your browser and enter the IP address of the AXIS 
230 in the location/address field. The first time the 
camera is accessed, there will be no need to log in.

The Live View page opens, allowing you to 
proceed with the product’s configuration, by 
clicking on the 

Setup link.