Axis 25205 Manuale Utente

290B Outdoor housing

Maintenance

Annual maintenance is required to inspect all visible seals for wear and damage. Worn or

damaged seals should be replaced.

Recommendation:

Treat all visible seals with silicone at least once a year to prevent them

from drying out and to aid opening and closing of the housing. Use an all-purpose silicone

spray for use on electrical equipment and components, and also compatible with rubber,

metal and plastic materials.

Clean the housing with a damp cloth only (not on the window). Do not use chemicals to

clean the housing as this may affect the powder coat finish. The window should only be

cleaned with a dry cloth.

Burnt fuses in the fused terminal block can be replaced to reinstate the power supply of the

camera. Use a 5A, 250 V AC fuse and ensure that the mains is disconnected before

beginning.

Specifications

Weight

Power requirements

Operating temperature

Approx. 6 lbs

(2,75 kg)

AXIS 290B Power adapter (included):

Input voltage: 100-240 (50/60HZ) VAC

Input current Max 1.2A

Max Output Power 50W

Output voltage 15 VDC

Output current 3.4 A

IMPORTANT!

Power adapter is for indoor use only!

AXIS 290B Housing:

Input voltage: 9-15 V DC

Input current:

Max 2.8A at 9V, 3A at 12V, 3.5A at 15V

-4F to 108F (-20°C to +42°C)

Warning: The housing should

not be exposed to many hours

of direct sunlight as this may

overheat and damage the

camera beyond repair. The

maximum temperature inside

the housing should never

exceed 122F (50°C).

Specifications may change without prior notice.

INSTAL GUIDE HOUSING ENV WHITE r3.0 PART NO.

25205