APart CMRQ108 Dépliant
TECHNICAL SPECIFICATIONS
APart CMRQ108
BUILD IN SPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
Multiroom, hi-end stereo enjoyment and 5.1 sensations in the
home environment or ultra-discrete background music in a
lounge, a bar, boutique,…: Style and quality meet in the CMRQ
Kevlar ™ speaker. These in-wall / in-ceiling speakers bring crystal
clear high notes and powerful deep basses that will astound the
most demanding audience.
home environment or ultra-discrete background music in a
lounge, a bar, boutique,…: Style and quality meet in the CMRQ
Kevlar ™ speaker. These in-wall / in-ceiling speakers bring crystal
clear high notes and powerful deep basses that will astound the
most demanding audience.
The CMRQ series has a 6.5” bass mid-speaker with a DuPont®
Kevlar™ cone and low loss rubber surround. High frequencies
are covered by a tiltable 1” silk dome tweeter that is carefully
matched to deliver an amazing and detailed sound, without the
harshness commonly found in cheap metal alloy domes. The
treble contour can be adjusted in 3 steps to suit your personal
preferences.
Kevlar™ cone and low loss rubber surround. High frequencies
are covered by a tiltable 1” silk dome tweeter that is carefully
matched to deliver an amazing and detailed sound, without the
harshness commonly found in cheap metal alloy domes. The
treble contour can be adjusted in 3 steps to suit your personal
preferences.
CMRQ108 is 8-Ohm standard, and can easily be switched to 12
ohms. This way you can use two speakers in parallel on one
amplifier channel, giving a total load impedance of 6 Ohm. This
load impedance is standard for most surround receivers.
ohms. This way you can use two speakers in parallel on one
amplifier channel, giving a total load impedance of 6 Ohm. This
load impedance is standard for most surround receivers.
Mounting is easy and straightforward: the speaker clamps accept
a wall thickness up to 28mm.
a wall thickness up to 28mm.
The CMRQ speakers are not magnetically shielded, which is not
necessary unless you install them close CRT screen. Flatscreens,
the ideal partners for CMRQ speakers are insensitive to magnetic
fields. Instead, APart has paid attention to many other details :
gold plated wire terminals, a carefully tuned crossover with high
quality components, solid steel speaker grille and top notch
quality are your guarantee for the purest musical enjoyment.
necessary unless you install them close CRT screen. Flatscreens,
the ideal partners for CMRQ speakers are insensitive to magnetic
fields. Instead, APart has paid attention to many other details :
gold plated wire terminals, a carefully tuned crossover with high
quality components, solid steel speaker grille and top notch
quality are your guarantee for the purest musical enjoyment.
Speaker type
in-wall/in-ceiling, two way hifi .
Bass-mid speaker
6.5’ DuPont® Kevlar cone
Tweeter
1’ soft dome, pivotable within approx 25
degrees in all directions
degrees in all directions
Nominal impedance
8 ohms (can be switched to 12 ohms)
Recommended amplifier power
15 to 120 watts per channel
Tweeter level adjustment
3 level treble contour switch
Crossover frequency and slope
3000 Hz, 12 dB/oct
Frequency range
45* – 25000 Hz
Sensitivity
87 dB spl (2.83V/1m)
Dimensions outside H x W
296 x 196 mm
Cutout dimensions H x W x D
272 x 172 x 78 mm
Net weight :
1.65 Kg
Accessories supplied
grille removal tool, build-in template
Can be painted into any RAL color from a minimum of 12 pieces - Ref. : PAINTCM