Allen-Bradley devicenet modules in logix5000 control systems Manuale Utente
Publication DNET-UM004A-EN-P - March 2004
2-12 Configure Your Network Offline
Clear or Set the Automap on Add Check Box
As an option, RSNetWorx software can automatically assign the
memory location for each device. Depending on how you want to
organize the memory, you may or may not want to use this option.
memory location for each device. Depending on how you want to
organize the memory, you may or may not want to use this option.
If you want to:
Then:
After you add your devices to the scan list, manually assign the memory location
for each device.
for each device.
As you add your devices to the scan list, the software automatically assigns the
memory locations for each device.
memory locations for each device.
Memory
device at address 1
device at address 2
device at address 3
leave gaps between devices
2. Clear (uncheck) the
Automap on Add check box
1. Click the Scanlist tab
Memory
device at address 1
device at address 2
device at address 3
place devices in sequential DINTs
2. Set (check) the Automap on
Add check box.
1. Click the Scanlist tab