Asrock h61de-s3 Manuale Utente

28

Chassis Speaker Header   

Please connect the chassis    

(4-pin SPEAKER 1)

 

 

speaker to this header.

(see p.12  No. 18)

Chassis and Power Fan Connectors 

Please connect the fan cables  

(4-pin CHA_FAN1)

 

 

to the fan connectors and  

(see p.12  No. 20)

 

 

match the black wire to the    

  

ground 

pin.

(3-pin CHA_FAN2)
(see p.12  No. 8)

(3-pin CHA_FAN3)
(see p.12  No. 31)

(3-pin PWR_FAN1)
(see p.12  No. 32)

GND

+12V

PWR_FAN_SPEED

 

       Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin  
       CPU fan still can work successfully even without the fan speed control function.  
       If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this  

 

       motherboard, please connect it to Pin 1-3.  

3-Pin Fan Installation

 

GND
+12V

CHA_FAN_SPEED

GND

+12V

CHA_FAN_SPEED

FAN_SPEED_CONTROL

CPU Fan Connectors 

 

Please connect the CPU fan 

(4-pin CPU_FAN1)

 

 

cable to the connector and 

(see p.12  No. 2)

 

 

match the black wire to the    

  

ground 

pin.

GND

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

 

 

Connect to the hard drive activity LED on the chassis front panel. The LED 
is on when the hard drive is reading or writing data.

 

The front panel design may differ by chassis. A front panel module mainly 
consists of power switch, reset switch, power LED, hard drive activity LED, 
speaker and etc. When connecting your chassis front panel module to this 
header, make sure the wire assignments and the pin assign-ments are 
matched correctly.

(3-pin CPU_FAN2)

 

 

(see p.12  No. 3)

GND

+12V

CPU_FAN_SPEED