3M X62w Manuale Utente

25

2. Equipment connection and network setting

 2.5.3 Port Settings 

 Displays and confi gures communication port settings. 

 Click the  [Apply]  button to save the settings. 

 • The new confi guration settings are activated after restarting the 

network connection. The network connection must be restarted when the 
confi guration settings are changed. The network connection can be restarted 
using  [Network Restart]  on the main menu. 

 NOTE 

(Port:23)

Confi gures command control port 1 (Port:23).

Click the [Enable] check box to use port 23.

Click the [Enable] check box when authentication is required 

for this port.

(Port:9715)

Confi gures command control port 2 (Port:9715).

Click the [Enable] check box to use port 9715.

Click the [Enable] check box when authentication is required 

for this port.

Confi gures the SNMP port.

Click the [Enable] check box to use SNMP.

Confi gures the destination of the SNMP Trap in IP format.

Confi gures the SMTP port.

Click the [Enable] check box to use the e-mail function.