APRILIA scarabeo 100 4t Manuale Utente
66
use and maintenance Scarabeo 50
- Scarabeo 100 4T
REMOVING
THE EXHAUST SILENCER
THE EXHAUST SILENCER
Carefully read page 47 (MAINTENANCE).
♦
Position the vehicle on the centre stand,
on a solid and level surface.
on a solid and level surface.
Before you go on with the following op-
erations, allow the engine and the silencer
to cool down to the ambient temperature
to avoid burns.
erations, allow the engine and the silencer
to cool down to the ambient temperature
to avoid burns.
♦
Unloose and remove the two fixing screws
(1) from the engine silencer.
(1) from the engine silencer.
Screws (1) driving torque:
25 Nm (2.5 kgm).
25 Nm (2.5 kgm).
♦
Unloose and remove screws (2).
Screws (2) driving torque:
12 Nm (1.2 kgm).
12 Nm (1.2 kgm).
♦
Remove the exhaust silencer (3).
WARNING
NOTE
On reassembly, replace the seal
between the exhaust manifold and the si-
lencer with a new one.
lencer with a new one.
1
3
2