APRILIA scarabeo 100 4t Manuale Utente

Pagina di 20
37
use and maintenance Scarabeo 50 
 - Scarabeo 100 4T
PRELIMINARY CHECKING OPERATIONS
Check
Page
Disc brakes
Check the functioning, the fluid level and make sure there
are no leaks. Check the wear of the pads.
Top up, if necessary.
31, 32, 61
Rear drum brake
100
 
Check the functioning, the idle stroke and control lever
condition. Adjust the play, if necessary.
33, 62
Accelerator
Make sure that it works smoothly and that it is possible to
open and close it completely, in all steering positions.
If necessary, adjust and/or lubricate it.
70
Mixer oil 
28
Wheel / tyres
Check the tyre surface, the inflation pressure, wear and
tear and any damage.
Remove any foreign matter that may be stuck in the tread
grooves.
34
Brake levers
Make sure that they work smoothly.
If necessary, lubricate the articulations.
Steering
Make sure that the steering rotates smoothly, without any
clearance or slackening.
63
Stand
Make sure that they work smoothly and that the spring
tension brings it back to its normal position. If necessary,
lubricate joints and hinges.
68
Fastening elements
Fuel tank
Check the fuel level and top up, if necessary.
Make sure there are no leaks or occlusions in the circuit.
27, 83
Lights, warning lights,
injection warning light
, horn and electric
devices
Check the proper functioning of all the devices.
Change the bulbs or intervene in case of failure.
72 – 81
INSTRUCTIONS FOR USE
WARNING
Before departure, always carry out a pre-
liminary checking of the vehicle, to make
sure that it functions correctly and safely,
see the following table PRELIMINARY
CHECKING OPERATIONS.
The non-performance of these checking
operations can cause severe personal
injuries or damages to the vehicle.
Do not hesitate to consult your 
aprilia
Official Dealer in case there is something
you do not understand about the func-
tioning of some controls or in case you
suspect or discover some irregularities.
It does not take long to carry out a check-
up and this operation ensures you much
more safety.
Component
Check and/or top up, if necessary.
Make sure that the fastening elements are not loose.
If necessary, adjust or tighten them.
Injection pump 
18
Check operation.
(((
(((
(((
(
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))
))
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))
)))))
))))))
)))
)))
)))
))