australian-monitor amis26 Volantino

Distribution Amplifier

AMIS26

Description

The Australian Monitor Installation Series AMIS26 is a high quality 2 input, 6 output

distribution amplifier. The AMIS26 provides a low noise, feature packed, signal 

routing solution to cover a wide range of installation needs, at a contractor 

friendly price. 

Inputs

The AMIS26’s 2 inputs can be balanced or unbalanced and each input’s sensitivity

can be switched between Mic and Line level. Each of the AMIS26’s inputs is 

individually assignable to any of the 6 outputs via front panel DIP switches

Outputs

The 6 outputs can again be balanced or unbalanced and feature up to -60dB of

attenuation so they can be run as any combination of line level or mic level outputs.

Controls

Input Level: The input level controls are screw diver adjustable trim pots. The input

level can boost or cut the input signal by up to 15dB.

Input Assign Switches: The recessed DIP switches assign either input A or B to a

desired output.

Output Level: The output level controls are screw driver adjustable trim pots. This

level control attenuates the output level, with a range from -60dB at “Minimum”

position, to 0dBat “Maximum” position.

Output Level DIP switch: This switch will change the output sensitivity of the

desired output from Mic to line level.

24 VDC Phantom Power is also individually switchable per input

Metering

Input Level Meter: These 4 segment LED meters show the strength of each of the

AMIS26’s input signals. LED segments are calibrated to the following level markings

and show the following colours -20dBu (green), -10dBu (green), 0dBu (yellow),

+10dBu (red).

Phantom Power

-24 VDC Phantom power is also individually switchable per input.