Arctic Cooling vr005 Istruzione Sull'Installazione

nVIDIA GeForce GTX 460

RAM

60mins

Please follow the installation instructions provided with the main cooler.

Caution: Please make sure the heatsinks are not touching any circuit components as it 
may cause a short circuit to your VGA card.

Cure time

Heatsinks x 5

Heatsinks x 4

Screws (M3) x 2

Mounting plate x 1

*Thermal adhesive x 1

*Be aware that the thermal adhesive comes with a very 
short shelf life and shall be used within 1 week. We 
recommend storing the thermal adhesive in a cool area to 
avoid solidification. Refrigerate after opening. Additional 
heatsinks and thermal adhesive are available for purchase
at vga.arctic.ac

2. Install replacement mounting plate 
    comes with the accessories set

1. Uninstall default mounting plate

Heatsinks align to the bottom

Heatsinks align to the bottom

Heatsinks align to the left

Heatsinks align to the left

Heatsinks align to the right

Heatsinks align to the right

Apply pressure
(10 sec)

Apply pressure
(10 sec)

Heatsinks x 1

Heatsinks x 11

Voltage regulator

Voltage regulator

1

2

Installation Manual

For further information, please consult www.arctic.ac 

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC 
Switzerland. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.

Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac