HP 2000 Manuale Utente

Pagina di 115
Power connector cable
Description
Spare part number
Power connector cable
641394-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see 
), and then remove the following components:
Optical drive (see 
Keyboard (see 
)
Top cover (see 
USB board (see 
Remove the power connector cable:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
3.
Disconnect the power connector cable (1) from the system board.
4.
Release the power connector cable from the clips (2) built into the base enclosure.
5.
Turn the computer right-side up, with the front toward you.
Component replacement procedures
59