HP 2000 Manuale Utente

Pagina di 115
5
Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup
Utility includes settings for the types of peripherals installed, the startup sequence of the computer,
and the amount of system and extended memory.
NOTE:
Use extreme care when making changes in Setup Utility. Errors can prevent the computer
from operating properly.
Starting Setup Utility
NOTE:
An external keyboard or mouse connected to a USB port can be used with Setup Utility only
if USB legacy support is enabled.
To start Setup Utility, follow these steps:
1.
Turn on or restart the computer, and then press 
esc
 while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2.
Press 
f10
 to enter Setup Utility.
Changing the language of Setup Utility
1.
Start Setup Utility.
2.
Use the arrow keys to select System Configuration > Language, and then press 
enter
.
3.
Use the arrow keys to select a language, and then press 
enter
.
4.
When a confirmation prompt with your language selected is displayed, press 
enter
.
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes
, and then press 
enter
.
Your change takes effect immediately.
82
Chapter 5   Setup Utility (BIOS) and System Diagnostics