HP 20-700 Manuale Utente

Chapter 4

Operating in Automated Mode 99

Chapter 4

Note

The operator panel displays only 16 lines per screen. If the 

library contains more than eight drives, you must use the down 

arrow button to scroll to Drives 08 and above.

Drive Information

To view details about an installed drive, including its serial number and 

firmware version:
1. Press the [MENU] button to display the Main Menu.
2.  If necessary, press an arrow button until the cursor lines up with DRIVE 

INFO. 

3. Press 

the 

[SELECT] button.

A list of all installed drives will appear.

4.  Use the arrow buttons until the cursor underscores the desired drive.
5. Press 

the 

[SELECT] button.

The Drive Information Menu will appear (see 

 on page 45). The 

screen lists the manufacturer, model, status, serial number, interface type, 

and firmware version of the selected drive. See 

 on page 98 for a 

list of drive status messages.

CAP Magazine Status

To check the status of a CAP magazine and its contents:
1. Press the [MENU] button to display the Main Menu. 
2.  If necessary, press an arrow button until the cursor lines up with CAP 

CONTENTS.

3. Press 

the 

[SELECT] button.

The CAP Contents menu will appear. The screen lists the VOLSER of each 

cartridge in an installed magazine or it lists a status message. See 

on page 100 for the status messages that appear on this list.

Note

Each CAP has four magazines, numbered one through four, 

from the top location to the bottom.