HP 2533t mobile thin client Manuale Di Servizio
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language (or press
f2
)
Change the Computer Setup language.
Boot options
●
Set
f9
,
f10
, and
f12
delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot.
●
Enable/disable MultiBoot, which sets a boot order that can include most boot
devices in the system.
devices in the system.
●
Set the boot order.
Device configurations
●
Swap the functions of the
fn
key and left
ctrl
key.
●
Enable/disable USB legacy support. When enabled, USB legacy support
allows the following:
allows the following:
◦
Use of a USB keyboard in Computer Setup even when a Windows
operating system is not running.
operating system is not running.
◦
Startup from bootable USB devices, including a hard drive, diskette
drive, or optical drive connected by a USB port to the computer.
drive, or optical drive connected by a USB port to the computer.
Built-In Device Options
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable network Interface Controller (LAN)
●
Enable/disable LAN/WAN switching.
●
Enable/disable Wake on LAN.
●
Enable/disable the optical disc drive.
Port Options
●
Enable/disable the USB port.
●
Enable/disable the PC Card slot.
●
Enable/disable flash media reader.
68
Chapter 5 Computer Setup