HP 4182 Manuale Utente

Printer Features Parameters

29

❖

❖

❖

❖ System

Resolution

You can set the print resolution in dots per inch.

❖

❖

❖

❖ PCL

300 dpi, 600 dpi

❖

❖

❖

❖ PS

300 dpi, 600 dpi

❒ Default: 600 dpi
❒ The setting in the printer driver takes priority of the setting on 

control panel.

Toner Saving

You can select whether to enable Toner Saving.
• Off

• On

❒ Default: Off
❒ If “Toner Saving” is “On”, “EdgeSmoothing” is ignored even 

if it is “On”.

❒ The setting in the printer driver takes priority of the setting on 

control panel.

Print PS Errors

You can set whether the PS error sheet should be printed out.

• Off

• On

❒ Default: Off

I/O Timeout

You can set how many seconds the printer should wait before 
ending a print job. If data from other port often appears in the 
middle of the print job, you should increase the timeout value.

15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds

❒ Default: 30 seconds

I/O Buffer

You can set the size of the I/O Buffer. Normally it is not necessary 
to change this setting.

16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB

❒ Default: 32 KB