HP 4182 Manuale Utente
Printer Features Parameters
29
4
❖
❖
❖
❖ System
Resolution
You can set the print resolution in dots per inch.
❖
❖
❖
❖ PCL
300 dpi, 600 dpi
❖
❖
❖
❖ PS
300 dpi, 600 dpi
Note
❒ Default: 600 dpi
❒ The setting in the printer driver takes priority of the setting on
❒ The setting in the printer driver takes priority of the setting on
control panel.
Toner Saving
You can select whether to enable Toner Saving.
• Off
• Off
• On
Note
❒ Default: Off
❒ If “Toner Saving” is “On”, “EdgeSmoothing” is ignored even
❒ If “Toner Saving” is “On”, “EdgeSmoothing” is ignored even
if it is “On”.
❒ The setting in the printer driver takes priority of the setting on
control panel.
Menu
Description
Print PS Errors
You can set whether the PS error sheet should be printed out.
• Off
• On
Note
❒ Default: Off
I/O Timeout
You can set how many seconds the printer should wait before
ending a print job. If data from other port often appears in the
middle of the print job, you should increase the timeout value.
ending a print job. If data from other port often appears in the
middle of the print job, you should increase the timeout value.
15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds
Note
❒ Default: 30 seconds
I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary
to change this setting.
to change this setting.
16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB
Note
❒ Default: 32 KB
Menu
Description