HP 5000c-ct Manuale Utente

Sector Size

512 Bytes

Recording Zones

4.00

8.00

User Cylinders

3478.00

Cylinders

1053.00

1591.00

User sectors/Track
at zone 0

63.00

Data Heads

4.00

8.00

4.00

6.00

Disks

2.00

3.00

Note: The hard disk drive can be removed by the user for easy upgrades. The hard
drive is located on the bottom case and with the removal of one screw the hard drive
can be removed. The hard drive plastic case on the OB5000 is changed from the
OB4000 due to a design change requirement; therefore, they are not
interchangeable between platforms.

Flexible disk drive

Internal 3.5 inch, 1.44-MB flexible disk drive is standard on all models. The flexible
disk drive can be easily removed by the user and replaced with an additional battery
pack to double battery life. This is part of the modularity features of the OmniBook
5000.

Manufacturer: F1079A = Canon; F1079B = NEC (subject to
change)

Built-in I/O

9-pin, 115,000-b/s RS-232 port, UART 16550

25 pin bi-directional ECP and EPP parallel port

SVGA out (up to 1024 x 768 x 256 colors) with simultaneous viewing VGA out (640
x 480 x 65,536 colors)

115,000-b/s bi-directional infrared port. Note: Infrared hardware can support the
IRDA (Infrared Data association) higher speed standards when available.

Expansion Bus Connector for connecting to the docking station.

SCSI-2 port, mini 50 pin. Controller: AMD, 32-bit PCI bus, 10 MBps, asynchronous
max. transfer

NTSC/PAL port

Keyboard/mouse port

Headphone/stereo-out port

Microphone port

Stereo-in port

MIDI/joystick port