HP 5000c-ct Manuale Utente
36
5. Remove the Upper Cover by removing the Palm Rest Screw on the left side of the cover. Next,
pull the right side outward until it comes off the snap. Once the cover clears the snap, the left side
will lift free (see illustration below). The Microphone Assembly may dislodge from the Upper Cover
during removal. If it does not, gently pull the Microphone Assy from the pocket in the Upper Cover.
If necessary, the Microphone Assy may be removed from the Icon Board at this point.
will lift free (see illustration below). The Microphone Assembly may dislodge from the Upper Cover
during removal. If it does not, gently pull the Microphone Assy from the pocket in the Upper Cover.
If necessary, the Microphone Assy may be removed from the Icon Board at this point.
Heat
Spreader/CPU
Screws (2)
Spreader/CPU
Screws (2)
Heat Pipe
Bracket
Bracket
Display/Chassis
Screw
Screw
Heat Spreader
Assembly
Assembly
Palm Rest Screw
Figure 10 - Heat Spreader Assembly