HP ams dl320 Manuale Utente

Pagina di 86
 
Server software and configuration utilities  49 
 
Send alerts from iLO 2 regardless of the state of the host server. 
 
Access advanced troubleshooting features through the iLO 2 interface. 
 
Diagnose iLO 2 using HP SIM through a web browser and SNMP alerting. 
For more information about iLO 2 features, refer to the Integrated Lights-Out 2 User Guide on the 
Documentation CD or on the HP website (
 
Erase Utility 
  CAUTION:  Perform a backup before running the System Erase Utility. The utility sets the system to its 
original factory state, deletes the current hardware configuration information, including array setup and disk 
partitioning, and erases all connected hard drives completely. Refer to the instructions for using this utility. 
Run the Erase Utility if you must erase the system for the following reasons: 
 
You want to install a new operating system on a server with an existing operating system. 
 
You encounter an error when completing the steps of a factory-installed operating system installation. 
The Erase Utility can be accessed from the Maintenance Utilities menu of the SmartStart CD 
("
 
HP Systems Insight Manager 
HP SIM is a web-based application that allows system administrators to accomplish normal administrative 
tasks from any remote location, using a web browser. HP SIM provides device management capabilities 
that consolidate and integrate management data from HP and third-party devices. 
  IMPORTANT:  You must install and use HP SIM to benefit from the Pre-Failure Warranty for processors, 
SCSI hard drives, and memory modules. 
For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or 
the HP SIM website (
 
Management Agents 
Management Agents provide the information to enable fault, performance, and configuration 
management. The agents allow easy manageability of the server through HP SIM software, and third-
party SNMP management platforms. Management Agents are installed with every SmartStart assisted 
installation or can be installed through the HP PSP. The Systems Management homepage provides status 
and direct access to in-depth subsystem information by accessing data reported through the Management 
Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation 
Pack or the HP website (
). 
 
Redundant ROM support 
The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server 
has a 4-MB ROM that acts as two, separate 2-MB ROMs. In the standard implementation, one side of the 
ROM contains the current ROM program version, while the other side of the ROM contains a backup 
version. 
  NOTE:  The server ships with the same version programmed on each side of the ROM. 
 
Safety and security benefits 
When you flash the system ROM, ROMPaq writes over the backup ROM and saves the current ROM as a 
backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted