HP ams dl320 Manuale Utente

Server component identification 7 

Front panel LEDs and buttons 

 

   

1 

UID button/LED 

Blue = Identification is activated. 

Flashing blue = System is being remotely managed. 

Off = Identification is deactivated. 

2 

Internal health LED 

Green = System health is normal. 

Amber = System is degraded. To identify the component in a 
degraded state, refer to system board LEDs (on page 

Red = System critical. To identify the component in a critical state, 
refer to system board LEDs (on page 

Off = System health is normal (when in standby mode). 

3 

NIC 1 link/activity LED 

Green = Network link exists. 

Flashing green = Network link and activity exist. 

Off = No link to network exists. 

If power is off, view the LEDs on the RJ-45 connector for status by 
referring to the rear panel LEDs ("

4 

NIC 2 link/activity LED 

Green = Network link exists. 

Flashing green = Network link and activity exist. 

Off = No link to network exists.  

If power is off, the front panel LED is not active. View the LEDs on 
the RJ-45 connector for status by referring to the rear panel LEDs 
("

5 

Drive activity LED 

Green = Drive activity is normal. 

Amber = Drive failure occurred. 

Off = No drive activity. 

6 

Power On/Standby button 
and system power LED 

Green = System is on. 

Amber = System is shut down, but power is still applied. 

Off = Power cord is not attached, power supply failure has 
occurred, no power supplies are installed, facility power is not 
available, or the DC-to-DC converter is not installed.