HP color laserjet 3000n Manuale Utente

ENWW

To improve print speed and increase memory resources, you may want 
to disable jam recovery. If jam recovery is disabled, the pages involved 
in a jam will not be reprinted.

During the jam recovery process, the printer may reprint several 
good pages that were printed before the jam occurred. Be sure to 
remove any duplicated pages.

Press   (select button) on the LCD control panel.

Press 

 

(down arrow button) to highlight 

CONFIGURE DEVICE

, 

and then press 

 

(select button).

Press 

 (down arrow button) to highlight 

SYSTEM SETUP

, and then 

press   (select button).

Press 

 

(down arrow button) to highlight 

JAM RECOVERY

, and then 

press   (select button).

Press 

 

(down arrow button) to highlight the desired setting, 

and then press   (select button) to save the setting.

The printheads for your printer have microscopic nozzles that can clog 
when exposed to the air for more than a few minutes. The printer is 
designed to prevent nozzles from drying out when the printer is idle and 
when it is turned off by pressing and holding down 

 (power button) 

on the printer.

A printhead that is not used for long periods of time can also clog, 
resulting in a noticeable decrease in print quality. To unclog the 
nozzles, clean the printheads.

Clean the printheads when lines or dots are missing from printed text or 
graphics. These defects occur when ink nozzles in the printheads are 
exposed to air for long periods of time.

Cleaning the printheads when defects do not occur in printed text 
or graphics wastes ink and shortens the life of the printheads.