HP color laserjet 3000n Manuale Utente

ENWW

Use a USB cable to connect the printer to the computer if the computer 
has a USB port and is running Windows 98, Windows Millennium 
Edition (Me), Windows 2000, or Windows XP.

If your computer does not meet these specifications, connect the printer 
to your computer using a parallel cable.

In most cases, after you install the printer software and connect a 
printer to the computer, you can install additional printers with USB 
cables without reinstalling the printing software. 

It is recommended that you install the software before you connect 
the printer to the computer.

Do not connect the USB cable until you are prompted by the printer 
installation software.

Start Windows and make sure no other Windows applications 
are running.

Insert the Starter CD into the CD-ROM drive. The CD menu runs 
automatically.

If the CD menu does not run automatically, click Start, and then 
click Run. At the command line box, type the letter of your 
computer's CD-ROM drive followed by :\SETUP (for example, type 
D:\SETUP).

On the CD menu, click Install Printer Driver.

Choose your language, and then click OK.

Follow the instructions on the screen.

Click Connected to this computer, and then click Next.

In the Select Port screen, click USB, and then click Next.

When connecting the printer using a USB cable, you can install only 
one of the printer drivers (PCL 5c, PCL 6, or PS) at a time.